2024 Honda CR-V Air Filter in Union City, GA | Nalley Honda

The engine air filter on the 2024 Honda CR-V sits in the engine bay inside the top-mounted air intake housing near the front of the engine.

On the 2024 Honda CR-V with the 1.5L inline-4, the intake housing is easily visible once you open the hood. Most inspections and replacements access the rectangular housing cover secured by clips or screws.

• Find it in the engine bay, ahead of the throttle body and intake tube.
• Replacement typically requires unclipping or unscrewing the housing cover.
• Nalley Honda technicians inspect the housing and intake path for debris during service.

The cabin air filter on the 2024 Honda CR-V is located behind the glove box inside the passenger compartment.

Access requires opening the glove box and releasing the glove-box stops or lower trim to reach the filter access panel. This placement keeps cabin intake separate from the engine air intake and simplifies replacement compared with deeper dash locations.

• Located behind the glove box; not in the engine bay.
• Requires glove-box removal or lowering for access.
• Nalley Honda inspects the HVAC housing and seals when replacing the cabin filter.

The engine air filter protects the CR-V's 1.5L engine intake; the cabin air filter cleans air entering the vehicle HVAC system for occupants.

The engine filter prevents dust and debris from reaching the combustion chamber and sensors, which affects power and fuel economy. The cabin filter removes pollen, dust, and particulates from the air that flows through vents into the passenger compartment.

• Engine filter = combustion air protection, located in engine bay.
• Cabin filter = HVAC air quality, located behind the glove box.
• Both filters affect comfort and system longevity when neglected.

Signs of a clogged filter include reduced acceleration, lower fuel economy, rough idle for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

On the 2024 Honda CR-V, an engine filter loaded with road dust can reduce power from the 190-hp 1.5L engine and may increase intake noise. A dirty cabin filter often shows as reduced fan output, odors, or accelerated dust buildup on interior surfaces.

• Engine symptoms: sluggish acceleration, decreased MPG, rough idle.
• Cabin symptoms: weak vent airflow, stale or musty smells, visible dust.
• Technicians at Nalley Honda check sensors and intake paths when diagnosing issues.

Many owners can replace the engine air filter themselves; the cabin filter typically requires glove-box removal and moderate trim work, so some owners prefer dealer service.

Replacing the engine air filter on the 2024 Honda CR-V is often a straightforward clip-and-swap in the engine bay. The cabin filter procedure is more involved because of glove-box hinges and clips; Nalley Honda offers OEM parts and an intake/MAF visual check that many DIY jobs omit.

• DIY-friendly: engine air filter access in engine bay.
• Dealer-preferred: cabin filter behind the glove box needs careful trim removal.
• Dealer service includes intake housing and MAF visual inspection.

Yes — Nalley Honda uses genuine Honda parts for filter replacements and related service items.

Using genuine Honda parts helps preserve fitment, filtration performance, and compatibility with the CR-V's intake and HVAC systems. Nalley Honda's service center sources OEM filters to match factory specifications for the 2024 Honda CR-V.

• Genuine Honda filters sized for the 2024 Honda CR-V.
• OEM parts help ensure proper sealing and filtration efficiency.
• Nalley Honda installs and verifies fitment as part of the service.

Nalley Honda's OEM-trained master technicians complete air filter replacements during a single service appointment; exact time varies with shop volume and inspection needs.

Because technicians perform an intake housing and MAF sensor visual check along with filter replacement, total service time depends on appointment scheduling and any additional findings. For a specific appointment window, use the schedule link or call the service desk at our Union City location.

• Service completed during one appointment by OEM-trained staff.
• Time varies by shop load and whether additional inspections are needed.
• Schedule a visit via the service scheduler for a confirmed time slot.

We follow a stepwise process for 2024 Honda CR-V air filter service that focuses on fitment, airflow, and component inspection. Typical steps include engine air filter inspection and replacement, cabin air filter inspection and replacement, intake housing check, and a visual inspection of the MAF (mass air flow) sensor. Technicians remove the filter housings, verify correct OEM filter orientation, clear debris from the intake path, and reinstall housings to factory torque or clip engagement specifications.

This service helps protect the 1.5L inline-4's intake path and the CR-V's HVAC performance. Items included are the OEM-spec filter(s), disposal of the old filter, visual intake/MAF inspection, and a post-service road-check when needed. Bring your 2024 Honda CR-V to Nalley Honda in Union City for OEM-spec filter service — schedule service.

The 2024 Honda CR-V is equipped with a 1.5L inline-4 engine (engine code NAG) that requires a properly sized engine air filter to protect the turbocharged intake and downstream sensors. The cabin filter is sized to the CR-V's HVAC plenum and designed to filter pollen and fine dust from the passenger compartment. Exact OEM part numbers and recommended replacement intervals are published in the owner's manual and parts catalog; Nalley Honda can confirm the correct OEM part references for your VIN at the time of service.

Common attention points for this model include heavy dust loading in the intake housing when driven on unpaved roads or during extended pollen seasons. Technicians look for torn media, crushed filter frames, and contaminated intake housings that can reduce filtration effectiveness. Bring your 2024 Honda CR-V to Nalley Honda in Union City for OEM-spec filter service — schedule service.

Nalley Honda serves the Atlanta metro area, including Jonesboro and Fairburn, from 4197 Jonesboro Rd in Union City. Local climate and road conditions — seasonal pollen, dust, and occasional construction zones — increase filter loading compared with low-dust environments, so more frequent inspections can be beneficial for drivers who commute or travel rural roads.

Our service center staffs OEM-trained master technicians who perform filter replacements, intake and MAF visual inspections, and HVAC checks. We also use only genuine Honda parts to ensure proper fit and filtration. For service availability, check current offers on our service specials page and schedule appointment online.